Spring-type fastening “SILA” for the construction of wooden houses to buy in Minsk at a good price 1.80 euros
Spring bolt “SILA” for the construction of wooden houses to buy in Minsk at a good price 1.80 euros
The price of 240 mm is 1.80 euros. Tel: + 375-296-200-567
The responsible stage of building a wooden house is the installation of wooden walls. Quality installation guarantees the further operation of the house without the hassle and rework.
Usually the installation of wooden elements of the house is carried out on nagels and studs. At the same time, the walls of the house are in a state of free forces, which give cracks and gaps. The house gets wet and cold air, the wet insulation does not fulfill its functions. The house becomes cold and damp.
The technology of assembly of a bar by the company "Ariline" means the use of a spring bolt "Sila" for the construction of wooden houses. It is used for mounting walls from a log and round logs.
Spring bolt “SILA” for the construction of wooden houses consists of a spring, a screw, two washers and a lock washer. The screw tightens the wall elements together, and the spring rests against the upper bolt washer and with a force of 260 kg. pulls the bottom part of the wooden wall to the top.
The use of the “SILA” Spring Bolt for the construction of wooden houses makes the house airtight and dry, relieve you of the problems associated with the shrinkage of the wooden house.
Spring bolt “SILA” for the construction of wooden houses. What is it for? Where in Minsk to buy?
The installation of the Spring Bolt “SILA” is simple and is done in two stages:
- Drilling of two holes 35 mm and 12 mm in a log or beam, is performed before the workpiece is raised to the attachment point. One spring bolt per meter of detail is sufficient.
- Screwing the screw with a screwdriver or manually.
Applying Spring Bolt “SILA” for the construction of wooden houses, it is necessary to expect that one wooden part comes from two sets. There are nodes along the edges of the part. The more a wooden element is longer, the more nodes you need.
Using the “SILA” node, the parts of the wooden house are maximally in contact and shrinkage is prevented.
Technical description of the "Sila" spring bolt for the construction of wooden houses
A spring unit or shrinkage compensator or spring bolts is a method of fastening wooden elements, from the lower crown to the gable pedestal, using the force of the spring pressure to pull together all the elements of the wooden structure and to evenly compensate the natural shrinkage of the wooden house.
The principle of the “SILA” spring unit is the tightening of two wooden elements between each other, due to the force of pressure, the opening of the steel spring from the top and the rigid threading in the lower rim of the wooden structure.
People are very familiar with the shrinkage of a wooden house. In varying degrees, it is present both in log houses and in houses made of timber.
Depending on the processing of wood, shrinkage of the house can be from 2 to 20 percent. The natural weight of the house is not enough to compensate for shrinkage, the more the load from the foundation to the ridge is reduced.
It turns out that the most unprotected places in the construction where the weight of the house does not affect the edges of window and door openings, the upper crowns, and pediments.
It is there that cavities and cracks begin to emerge, which leads to a deterioration in the tightness of the house.
Obsolete nagel fasteners, studs, braces are not applicable for window and door openings. The difficulty of mounting metal studs, makes them unsuitable for fixing gables and upper rims. Nagel in modern designs are used by tradition.
Compensators shrinkage or spring bolt “SILA” for the construction of wooden houses is also convenient to use for punching, where the tightening of metal pins is difficult due to the height.
The same pressure in the springs and their non-stop action give a uniform compensation for the shrinkage of the wooden structure.
The use of work with spring-loaded knots results in time savings. It is possible to start finishing the premises already at the advent of 2 months.
The spring bolt “SILA” for the construction of wooden houses replaces metal studs. This is a new era of wooden housing construction combining the advantages of previous technologies and possessing unique qualities - saving time, saving money and reducing construction risks!
The price for the ratio with the quality of the result achieved is quite low. If we compare the result of the use of the spring Force node, then the reviews are mostly positive. Specialists advise to buy and work with the spring node Force!
The quality of the assembly, when installing the wooden walls of the house, will become your guarantor of further operation without the hassle and rework.
Appearing on the market fasteners of the new generation: Spring bolt “SILA” for the construction of wooden houses immediately won popularity among builders and consumers not only at their own cost. Its purpose is a screed between each bar - 100x200, 150x150, 150x200 and 200x200 mm. Profiled and glued beam under the influence of the forces of tightening tightly pressed against each other.
The spring bolt “SILA” for the construction of wooden houses is intended for the assembly of wooden walls, whether it be a glued beam or a rounded log.
Screed logs and beams among themselves occurs due to the compression spring.
The device of the Spring Bolt “SILA” for the construction of wooden houses has become a necessary part for assembling wooden houses from logs and houses from logs.
The wooden house, having such a constructive feature, will be airtight, and therefore energy-intensive and dry, which will save many problems associated with the permanent shrinkage of the wooden structure.
When purchasing a Spring Bolt “SILA” for the construction of wooden houses, you should know that the minimum number of spring nodes is at least two sets per one piece. You need to arrange the nodes at the free ends of the parts. The longer the wooden part of the house, the more spring knots should be placed. With this amount, reliable and tight contact between the joints is guaranteed
What is the use of the “SILA” spring bolt for the construction of wooden houses
The shrinkage of the wooden house is a long process that leads to the loss of the thermal insulation of the walls and does not allow the owner of the finished wooden house to settle in it. To combat this process, shrinkage compensators began to be used, namely, spring nodes "force". To preserve the geometry and avoid cracks in the beam or beam.
What exactly is this “SILA” node, and also how it works and what it is for, we are talking about in this article.
Spring bolt “SILA” for the construction of wooden houses: this site has a fairly simple design, and as a consequence, it is inexpensive. The spring assembly must necessarily be made of good steel, which in addition is covered with an anti-corrosion solution. As for the design of this installation, it is the following:
At the base of the spring unit is a self-tapping screw, the thread of which occupies half of the spring unit.
Another main element of this unit is a spring, which, on the one hand, has a support washer, due to which it is tensioned or loosened. The upper part of the self-tapping screw is designed for fast and convenient twisting with a screwdriver.
In this case it is worth mentioning that to fasten the spring unit “SILA” it is necessary in the upper crown of the bar, to make a groove.
The diameter of the spring bolt “SILA” for the construction of wooden houses should be 1.5 times larger than the diameter of the slot. You need to tighten the screws so much that the logs of the individual crown are pressed tight against each other. Installation of spring units is usually done in staggered order
To avoid the various negative consequences of the wrong erection of wooden walls or partitions, we recommend using the Spring Force “SILA”. You get an ideal fastening for both the walls of the timber and the rounded logs.
A specific issue from the sphere of wooden housing construction: what is the use of a spring bolt “SILA” for the construction of wooden houses?
Nowadays, many people decide to build their own wooden house. Given the fact that the price of building products made of wood is not very expensive, many people choose to build an individual country house from a log or a profiled beam. Many make their choice on the construction of rounded logs of natural moisture. We will consider the application of the spring unit POWER in the construction of wooden houses from a bar of natural moisture and houses from round logs of natural moisture.
To solve the shrinkage problem, the fastening element - STRING spring unit was developed. With the help of this node, it is possible to decently load logs and timber beam of wooden log houses. The spring bolt "Sila" for the construction of wooden houses with the correct structural calculation, can so qualitatively pull together (fasten) logs and beams among themselves that the "buckling" of logs and timber becomes practically impossible.
Spring bolt “SILA” for the construction of wooden houses - a real fastener to prevent gaps between the crowns. Its direct purpose is to maximize the binding force of the crowns, except for the weight of the crowns and the roof itself. There are no more modern, technological possibilities to tighten the crowns vertically.
The spring bolt “SILA” for the construction of wooden houses is galvanized and does not corrode.
Prices for the spring unit “SILA”:
Spring assembly “SILA” for assembly of log houses
Size 10 x 200, 10 x 240, 12 x 240, 10 x 280
How much should I take?
Examples of calculation:
1. Size Spring bolt “SILA” for the construction of wooden houses - 10 × 280
Total cubic capacity - 65 m3
The cross-section of the profiled beam is 183 × 243
When arranging from the first crown - 877 pieces
When arranging from the line of windows of the 1st floor - 570 pcs.
When arranged on the attic floor and pediments - 307 pieces
2. Size of the spring bolt “SILA” for the construction of wooden houses - 10 × 200
Total cubic capacity - 65 m3
Section of profiled bar - 163 × 183
When arranging from the first crown - 1307 pieces
When arranging from the line of windows of the 1st floor - 850 pcs.
When arranged on the attic floor and pediments - 457 pieces
Scheme of marking for installation Size of the spring bolt “SILA” for the construction of wooden houses:
Install at least two spring assemblies per piece at its free ends. The longer the beam, the more spring knots should be put.
The “SILA” trademark on the screw head guarantees you the quality of the original spring unit “SILA”
A spring with a ground base gives the product the correct shape and distributes the force along the screw axis
The "Force" knot is produced in sizes of 10x200, 10x240 and 100x280 mm for different sections of the wall material
The spring is subjected to a three-fold reduction during production, which guarantees its operation during the whole period of operation
Mounting galvanized washer gives the “SILA” node a more ergonomic look
The length of the thread is 80 mm, which accelerates the pace of assembly of the structure due to the lack of the need to drill a hole for the screw
A finer point of the thread with a special groove provides a comfortable use of the "Force" node without cracking the wood
The spring bolt “SILA” for the construction of wooden houses is affordable at the price of fasteners of a new generation, which is actively used in the construction of wooden buildings.
It ensures horizontal fastening of the crowns and prevents their displacement relative to each other. In comparison with nagels, which represent an alternative type of fastening, “SILA” node allows to avoid gaps, forming a single structure that does not require additional processing as shrinkage occurs.
The spring bolt “SILA” for the construction of wooden houses consists of a long screw, two washers and a spring; such a design, with screwing, allows you to monitor and guide the drying process of wood, pressing the logs against each other and not allowing the formation of space between them. Thus, the house does not lose its shape, it avoids distortions and curved walls even when building on marshy soils.
We speak English, German, Turkish, French and Russian
+375298-06-05-67 -- WhatsApp, Telegram, Viber
You can watch a video-review of the wooden house "White House" made of glued laminated timber Archiline Houses:
Wooden house made of glued laminated timber "White House"
You can see a video-review of the wooden house “Mirage”:
Wooden house "Mirage" from profiled glued timber 99m2
If you are interested in spring-type fastening “sila” for the construction of wooden houses to buy in minsk at a good price 1.80 euros , you may:
More from section Spring-type fastening “SILA” for the construction of wooden houses
Spring-type fastening “SILA” for the construction of wooden houses Price 240 mm - 1.80 EUR Tel: + 375-296-200-567 Walls and inter-wall partitions for wooden houses are one of the main details of the entire structure, they represent the ...
Spring-type fastening “SILA” for the construction of wooden houses to buy at a good price 1.80 euros
Spring-type fastening “SILA” for the construction of wooden houses to buy at a good price 1.80 euros Spring bolt “SILA” for the construction of wooden houses: the price of 240 mm - 1.80 euros. Tel: + 375-296-200-567 Wooden ...
ArchiLine Wooden Houses
114-49, Necrasov str., Minsk, Republic of Belarus, 220049
The site is powered by Nestorclub.com